The Modular iBunker¿ is a turnkey modular system that incorporates the most advanced Multi-Threat proprietary structural security© system in the industry. The Modular iBunkeroffers Tier IV protection at Tier II pricing. The Modular iBunker is engineered to exceed IBC-2006 exterior building standards for interior applications.


Product Details

Using individual, two-foot wide iGuard Armor Panels that are locked together with a series of strategically positioned cam-locks along the edge of each panel to create complete, six-sided enclosures using floor, wall, and ceiling panels.

There are a series of Penetration Management Devices (PMD’s) used to facilitate and manage the exchange of various elements from the outside to the inside of the enclosure. The iVent Mechanical Dampers manage fresh air and mechanical air exchange. The iPassage Door System controls human and equipment exchange, and the iPortal Transfer Portals enable cable, wire, and plumbing to be run into and out of the enclosure. The purpose of these PMD’s is to allow activity between the contents of the enclosure and the support systems needed to operate a functioning unit without compromising the structural integrity or breach the security of the Modular iBunker.

The Modular iBunker is installed independent of the building architecture and serves to surround and contain unlimited areas of space with single unit configurations. The smallest units start around 80 square feet but can be as large as hundreds, if not thousands of square feet. Vast sizes are rapidly deployed with an internal support structure consisting of columns and joist. Joist runs occur every ten feet, the span of a standard ceiling panel and are supported by columns on various intervals.